WADECO
HOMEJAPANESEChineseKorea
WADECO Co., Ltd.
New ProductsProducts InformationCompany ProfileContact Us
Products Information

Product Tracking Sensor

MWS-MT-1

UNAFFECTED BY HEAT, FLAMES, AIRBORNE PARTICLES OR VAPOR!

General

The MWS-MT-1 type Micro-Tracker has been developed for product tracking in the hot line process. The unit consists of a controller, antenna, and reflector.
The MWS-MT-1 is an FM | CW method range finder.
The MWS-MT-1 emits microwaves towards the reflector in order to measure the reflection from it.
When a slab interrupts the beam between the antenna and the reflector, the reflection will not be received resulting in the slab presence signal being output.
The sensor can be installed either on a diagonal or horizontal axis.
Because of the digital detection, this will not be affected by vapor, water running on the slab and/or water spray.

MWS-MT-1

Features

• Unaffected by adverse conditions

Microwaves are unaffected by heat, vapor, flames, or water running on the slab and water spray.
When countermeasures to heat are required, use the options above.

• High reliability

The MWS-MT-1 detects the presence or absence of the slab by receiving or not receiving the reflection from the reflector. Because of digital detection, this will not be affected by vapor, water running on the slab or water spray.

• High speed response time

50msec. update time.

• No beam slippage

Beam adjustment is easy because the beam is conical-shaped and there will be no errors caused by slippage of the beam.

• No set-to-set interference

This permits the use of multiple Micro-Trackers in close proximity to each other.

• Enclosure rating IP65 equivalent

• New reasonable price

Specifications

Type Sensor MWS-MT-1
Reflector
CR-200T
(In case of vertical installation, reflector is not necessary)
Power Supply AC90~240V, 50/60Hz
Operating range 10m (distance from antenna to reflector)
Frequency and Transmission power 24GHz approx. Less than 10mW
PAGE TOP