WADECO
HOMEJAPANESEChineseKorea
WADECO Co., Ltd.
New ProductsProducts InformationCompany ProfileContact Us
Products Information

PCI Flow Meter

Microwave Type PCI Flow Meter MICRO-FLOW MWS-MF-1

General

The MWS-MF-1 (Microflow) is installed on the coal feeding pipe of the blast furnace tuyere and measures the density and speed of the fine coal in order to calculate and output the flow rate.

MWS-MF-1

Features

High accuracy, high reliability

There is a very good linearity between the phase delay and density. Due to this, low density to high density will be measured with high accuracy.

The speed is calculated by the intercorrelated time difference in density between the upstream side and downstream side.

The sensor's inner pipe is made of microwave penetrable ceramic to prevent abrasion and there is no protrusion in it.

Continuous measurement can be easily performed.

The density and the speed of the fine coal flowing in the pipe can be continuously measured because the sensor is installed in the pipeline.

Convenient functions are built in

The system can be set up, the status of operation can be monitored and parameters can be set with a standard laptop.

The monitoring of the density, speed and quantity of flow are available and can be output by 4-20mA analog output.

The flow calibration curve can be set and the zero reference point can be adjusted remotely.

Specifications

Type
MWS-MF-1
Measurement Method
Microwave
Frequency
24GHz
Power Supply
DC24V±5%
Power Consumption
Approx. 10W
Measurement
Density : 0`100kg/m3
Speed : 0`20m/s
Flow : 0`3t/h
PAGE TOP