WADECO
HOMEJAPANESEChineseKorea
WADECO Co., Ltd.
New ProductsProducts InformationCompany ProfileContact Us
New Products

Vertical 3D Profile Meter For Blast Furnace (MWS-BF-3DV)

The Wadeco MWS-BF-3DV Milli-Scanner is a combination of a mechanical scanning system and high-speed rangefinder. By following the rotation of the feeding chute, the profiles of the falling material can be continuously measured immediately after it has settled.

Lance-type Blast Furnace 3D Profile Meter (MWS-BF-3DL)

Horizonta Blast Furnace 3D Profilemeter (MWS-BF-3DL)

The Wadeco MWS-BF-3DL Milli-Scanner is a combination@of a mechanical scanning system and high-speed rangefinder which can be used to display both a 3D surface map after every charge or a 2D stockline profile after every feeder rotation.

Lance-type Blast Furnace 3D Profile Meter (MWS-BF-3DL)
Milliwave Level Sensor For Torpedo Car Level Measurement (MWS-79RF-TP)

Lanceless Bast Furnace 3D Profile Meter
(MWS-BF-3D)

The Wadeco MWS-BF-3D Milli-Scanner is a combination of a mechanical scanning system and high-speed rangefinder which can be used to display both a 3D surface map after every charge or after every feeder rotation.

Lanceless Bast Furnace 3D Profile Meter (MWS-BF-3D)

Lanceless Bast Furnace 2D Profile Meter
(MWS-BF-2D)

The Wadeco MWS-BF-2D Milli-Scanner is a combination of a mechanical scanning system and high-speed rangefinder which can be used to display a 2D stockline profile after every feeder rotation.

Lanceless Bast Furnace 2D Profile Meter (MWS-BF-2D)

Microwave Type PCI Flow Meter (MWS-MF-1)

The MWS-MF-1 (Microflow) is installed on the coal feeding pipe of the blast furnace tuyere and measures the density and speed of the PCI in order to calculate and output the flow rate.

Microwave Type PCI Flow Meter (MWS-MF-1)

Microwave Sensor for Crane Proximity Detection (MWS-CAS-3-P)

MWS-CAS-3-P Micro-Robo is a microwave sensor developed specifically for use on coke quenching cars as a proximity detection sensor.
The sensors and reflectors are installed face-to-face on adjacent coke quenching cars running on the same rails. When either car enters the set slow or stop zones, the corresponding sensor will output a relay signal telling the car to either slow or stop.

Microwave Sensor for Crane Proximity Detection (MWS-CAS-3-P)

Milliwave Range Finder
(MWS-79RF)

Compact 79GHz Milli-Ranger

The type No. MWS-79RF Milli-Ranger is a milliwave range finder which uses the FM-CW system. Through use of guidepipes and reflectors, the controller can be installed away from the high temperature area.

Milliwave Range Finder (MWS-79RF)

Coke Oven Level Sensor [With Reflector]
(MWS-24RF-CH)

MWS-24RF-PCH type Range Finder developed, first in the world, specifically for measuring the coal level in the Coke Oven.

Coke Oven Level Sensor [With Reflector]

Coke Dry Quenching Level Sensor
[Horizontally Mounted Type] (MWS-24RF-CDQ-R)

The MWS-24RF-CDQ-R Level Sensor is a FMCW type Microwave Level Sensor that consists of a controller, antenna, guidepipe and reflector designed for measuring the level of coke in the CDQ.

Coke Dry Quenching Level Sensor [Horizontally Mounted Type]
PAGE TOP